juanone 289 drivetrain 04

Last night Rick (eliminator) and I installed the Comp Cams' Roller Rockers. They are neat.

Next the intake manifold, valve cover spacers and distributor. We are getting close to finish. Then the clutch, Hyd Throw out bearing and transmission.

It is looking like the middle of June for the car to be ready to be picked up and then on to the engine install.

Enjoy the photos.
http://www.uniquecobra.com/uploaded/...rockers_01.jpg

http://www.uniquecobra.com/uploaded/...rockers_02.jpg

Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net

http://www.kentuckycobraclub.com

Nice photos. What intake are you using?

--Patrick

Patrick:

We are using the Edelbrock Air Gap Performer with a Quick Fuel Technologies 650cfm Carburetor. Nothing too radical with approximately 365hp. at the flywheel.

Juan

Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net

http://www.kentuckycobraclub.com

Juan,

Make sure you check the geometry of the rockers and the placement of the roller on the valve stem at 1/2 lift.

Looks great!



Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54

Hi Brent:

I am a novice at this, so, can you explain the process of checking the geometry of the rockers? Maybe Rick is planning to do just that, I will check with him, I am just a cleanup boy. Thanks for the tip.

Juan

Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net

http://www.kentuckycobraclub.com

OH don't worry Rick wont miss a thing. VERY particular and precise.





Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54

Nice recovery, Brent:D.

Clay

'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear

Annapolis, MD

:D:D:D:D:D:D:D


Do not start anything Clay ;)




Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54

Juan, Hope that Quick Fuel Carb works out better for you than it did for me. If anyone wants to buy a 750 CFM please send me a PM.

Steve Foushee
Unique #4279389

Hi Steve:

What type of problem did you have with the Quick Fuel carburetor?

Juan

Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net

http://www.kentuckycobraclub.com

Uh,oh Gasman, better get your gloves on!

John

Unique 289FIA #9367
351W Fuel Injected

Does anyone know how to set the float level and adjust the 4 corner idle on a Holley[?]
Also need info on selecting the correct power valve and jetting the carburetor;).

Rick
#4279405

:D

Clay

'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear

Annapolis, MD

now here is a man that needs help, flavor of discussion is getting deep, old southern saying says"don,t start nothing and there won,t be nothing".Rick, it,s been a long time, but ,bet old Zach and Cy could help us with this one.Ralph, like that little red snake wagging his tail.Brent-looked at that truck at gadsden, great buy.Will-alabama

But Rick........Bill Parham said it was the Quick Fuel didn't he?

Maybe it had some zinc that flaked off of those grade 2 Ace Hardware bolts and washers. OH wait, he only uses those on the valvetrain. My mistake.





Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54

Funny, but not really!

Ralph

All in good fun Will...........that Studebaker dog of yours would understand.

Not bad Brent........not bad at all:D:D:D

Clay

'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear

Annapolis, MD

I still have it if anyone wants to buy it.

Steve Foushee
Unique #4279389

yes, indeed, professor vernon von studebaker could sort things out , particularly, if he had just a small swig of that DIXIE LIGHTNING: you missed it Clay, passing it out at homecoming, sample bottles and all.Sure helps a soul sleep better.Will-alabama

Brent--Bill was speaking of that georgia lightning stuff, can,t get it on your hands.Will-alabama