-
'66 Vert Project
Well you guys need to appreciate the clean, easy, nice fitting build of your Unique Kits. This is the flip side of a car build. Dirty, tough pain in the a$$. The '66 Mustang pro touring project is in high gear and I sure miss the Deluxe Pallet kit. First I disassemble the car to the bare body,sand and soda blast,order all new body parts, narrow the 9" housing, remove the front frame,expand the rear wheel tubs (soon), and fab up a torque arm. I cut out the bottom of the stock front and rear frame rails and shot a laser between them. (The stock version is a "uni-body style" not prepared for 500 hp and traction.) Then I cut out the floor pans and the seat platforms between them so the new frame could slide up into the slot and be completely welded to the car. To fit a 3" exhaust in the tunnel later I removed the center "vert" brace and it will be replaced with 3 crossmembers including the front torque arm mount.
This is what I have so far after 200 plus hours:
I will post more as I progress if everyone thinks it is appropriate here.
-
Cutting, cleaning, laser, welding, fabricating, this all sounds like normal stuff to me. ;) I'm sure the end result will be something fantastic Brent.
-
I am getting too old for all of that, good job Brent.
-
yep
this one is for the younger folks---looks good Brent, what powerhouse do you plan for the baby?Sure, this is a good place to keep us informed of your progress.Me and Cyrus worked on a 66 stang all summer one year, kept unibody,but we worked our butts off dragging it from one place to another.I got a hammer you can use. Will-alabama
-
Brent:
Very nice! I am planning a similiar "g-force" style makeover to my '66 Mustang, so I will be anxious to see your updates as this project progresses!
Russ
-
Rick, You are more fit than I am.
Russ, I will post as often as I can. Glad to hear you are doing the same.
Will, It is the same little 408" Windsor I built last year, AFR 185 CNC ported heads, Lunati roller valvetrain, Scat crank and rods, KB pistons, gapless rings, Wiand intake, MSD, main girdle, Milodon pan, and probably a Paxton Supercharger with an alcohol/water injection system. Should make 500 on the motor and ????? with 8-12 lbs of boost. C-4 trans, fully manual reverse valve body, and a 9" rear. Check out the polished billet Wilwood calipers
Thanks guys,
-
looks good brent, Your really building this one from scratch. I'm playing with a 68 fastback, but i'm not nearly involved as you are. Still a slow process. Keep posting your progress and pics. I'm certainly interested. Take care Glenn
-
Brent, I'm wondering why you chose a C4 trans. I always thought they were too light duty for what your doing. Would a C6 or something aftermarket be better?
-
The C4 is plenty strong. There are a lot of drag racers beating on them every weekend. I have one in a 62 Falcon behind a 400+ HP 331 motor.
[Brent] Are you planning on a Mustang II front IFS kit? It looks that way after seeing your oil pan.
-
Nice work Brent. Is the front clip going to flip up or is it going to be a conventional set up?
-
Thanks guys
I am glad you guys don't mind me posting this here. There are some Mustang forums but it is really about the people not the cars. I don't have a Unique anymore but I still feel attached here.
Thanks!
Patrick, You are correct. Heidt's Mustang II. It wont even come close to fitting my application but it can be modified to work. I ordered the 2" drop spindles and that only gets you back to the original ride height. I have to install a frame rail above the existing frame rail and after everything is welded in place remove the original frame.
Hey Tony, The front will appear stock from the outside. The hood will open as usual with hinges (no springs on the hinges) it is a GT350 style with the same scoop as the Cobra. The grill will be an aluminum '66 with fog lights, horse, and corral, stock bumpers etc. The goal is a "stock appearing" muscle car that will play with a new ZO6 all day......with the top down (-: Under the hood the shock towers will be removed and the firewall will be smoothed. The burgundy car below has the exact same set up and engine compartment but it is no lower than stock so the frame was left alone. My project has the front lower frame 3.5" from the ground.
Glenn, I just want a car as cool (or close) to a Cobra with 4 seats. I really don't know how this will work out but I have a pretty good idea and over 1000 pictures and drawings. The reason I chose a rusty inline 6 auto car was the fact that only the shell would be used and I would not want to cut up a rust free solid GT.
-
All right Brent! My 72 Mach 1 needs that kind of frame. No more shimmy and shake just GO!
Too bad I am trying to keep it body wise stock. Glad to see you are into the project.
Ralph
-
Brent,
Have you ever checked out Bill Parham's Falcon? It has a Windsor based stroker and no shock towers.
-
Tony,
I have seen Bill's Falcon. Very nice car!
That motor is a "Clevor". Windsor block and Cleveland heads.
The Cleveland has always had 2 problems. It has the weight of a big block and the runners were so large that the motor had to be turned pretty hard for them to really run. They do run well though. Kelly (bittentoo) had a very mild Cleveland in his orange car and it was very impressive. Not too many big blocks wanted to play with it. If you put that head on a Windsor you have the buzz capabilities of a Windsor and the flowing heads of a Cleveland. Good combo! Not far from a NASCAR plant.
I know he tried to play with it in front of Unique a few years ago and it was from curb to curb. Lots of power but he ran out of talent........I am kidding.......I am kidding. The car was beautiful, well detailed, and a bad &^%%$*&(.
-
Brent
gonna be surprised at that 408 and set-up you got in it, looking good---keep us posted--nexyear homecoming?Will-alabama
-
Brent
valve covers look exactly like ones Cyrus-Zach put on engine they built for my car.Have to get Cy or Zach to tell you what -how they built , all they told me was a 383 stroker. Has lot more than me and momma needs for our tooling around though.Will-alabama
-
rear suspension mock up
The housing is narrowed and the new Moser axles arrived last week.
The custom lower control arm/shock mount brackets for the rearend turned out nice. A friend at Evansville sheetmetal cut them out on a water jet machine. The torque arm is finished and everything is tacked together.
While waiting for the axles I decided to go with a smooth painted dash ILO of the factory dash pad. So I shaved all of the pad supports and mounting hardware off of the top.
At least something is going back IN the car. After all of the carnage there is nothing left of it.
-
Smoothing out the dash should look nice. Are you going to put a rollbar in?
-
Keep them coming!
Intresting stuff!
-
-
Roll bar
Tony,
Something like this.
It will bolt in and be chrome, however, the braces will come forward not backward so the bars are nowhere near my girls heads.
-
Lots of progress.................. with fantastic planning and of course great
results!!!!
Keep the pictures coming!
-
Brent,
It looks like it is coming along very well! I've been out of the loop for a few weeks (traveling) so I'm catching up on things. You have waaay more ambition than most :)
-
-
Wow Brent the suspension/drivetrain really looks hi-tech. I am very much impressed.
Ralph
-
Thank you
Thanks guys.
The next part is the watts link and a bolt in torque arm mount. The watts link is going to be a challenge. Trying to make everything and just buy the heim ends.
Will see how it goes and let you know Monday.
Put the car on the ground last night..........32" from the ground to the bottom of the hood......From the oil pan to the top of the air cleaner (lowest drop base avail. just like Justin's) 32 1/4"
Oh well.....I wanted to cut that junk Milodon pan in pieces anyway.
-
Incredible... the fabrication skills of some folks really amazes me.
Impressive:D!!! Great job Brent.
-
Hey Paul,
I hope all is well with the rebuild of your home. Still thinking about you and your family.
Thank you for the compliment, however, I am the grunt on this project. A very good friend of mine owns a chassis shop (Mat Wright @ BRC Racecrafts)
He is the brains and methods to this project. I just do what I am told.
This is a project I could NEVER do without someone like him. I am very lucky.
Credit will go to whom credit is due.
Thanks
-
Hey Brent, things are proceding, albeit slowly, but moving forward little by little:o. We've started with the cottage, as it is a smaller, more manageable project. So, it will get us out of the FEMA trailer faster:). After this it will seem like a mansion:eek:!
We got the roof dried in a day or so ago, and all the metal exept one piece on one side of it (simple gable roof). I hope to have it done in a day or two, then get the housewrap on and most of the windows in (impact rated windows).
Thanks for thinking of us. If I ever get back up to Terre Haute, I'll look you up on the way. Missed you at the Homecoming...
-
Update
Small change of plans.
The shock/control arm mounts stand so far off the back of the housing the Watts link would need to be spaced back a bunch to clear everything. Instead a full width panhard bar and now making a anti-roll bar assy for the top of the housing. Things are getting pretty tight back there, just a few more bars.
The front torque arm mount is finished...Now just the antiroll assy and we can sit it back on the ground to start the front suspension. The front will get interresting to say the least. A new frame rail above the existing to get the ride height correct.
-
Brents Mustang
I wish I knew enough about cars to build something like this . If I did I would most likely have a garage full .
-
Wow Nice change Brent. Those shocks look like a tight fit. Nice engineering.
Ralph
-
Is this a Top Fuel Car??
One thing for sure it's not going anywhere, good beefy stuff. Should handle anything you want to power it with.
-
2 Attachment(s)
Brent,
Great to see you working on the car. As I mentioned, I am doing a '69 vert as well (must be a Cobra owner thing). Nothing like the fabrication you are doing - more just updating, maintence thing. I won't rule out more in the future but I am not the cutter/welder you are. Wife is loving driving it, though, so I have more excuses to get out in the Cobra.
One site I have liked during my restore is below:
http://www.1969stang.com/mustang/forum/
All builders of the old cars - questions - thoughts - they would love your project.
Posting some pictures Gerry Hagel took when he was up with his Cobra....
-
Nice Dave
I love the '69 body style. May be the coolest stang ever.
Well the front suspension is finished and the front sheetmetal is mocked up. Took 2 weeks to design and fabricate a forward tilt hood assy. I have to run a cowl scoop for engine clearance and I only like them if they go all the way back to the windshield. The hood raises,rolls forward 11", then stands up to clear the grill.
All of the holes in the firewall and existing frame have been welded shut and smoothed. Next is replace both rear quarters, wheel tubs, and trunk floor.
The file is too large so you can check the cardomain link below if you want to see it.
http://memimage.cardomain.net/member...61_23_full.jpg
-
Looking good Brent. 1 piece fiberglass frontend I bet that was a humdinger to get supported so you can flip it and tilt it so it clears. Susan or the girls pick the color yet or is that a choice for a family caucus?!
Take care
Ralph [;)]
-
Hood Only
Hey Ralph,
The hood,valance, and fenders are all seperate. Just the hood tilts forward.
They all have black primer on them so they look like one piece. I guess the fit and finish is ok if you thought they were all one piece. (-:
-
It is looking good Brent.
How high does the cowl scoop have to be? I like them only if they are not to big and look proportional to the rest of the car.
But from what I see so far I think what ever you do will look great.
-
Thanks
Tony, I could not agree more. I have fought the idea of a scoop from day one but I just do not have a choice at this point. I am having VFN make a fiberglass cowl scoop for me without a center body line and with rolled edges to match the contour of the fenders and wheel opening roll. It will be 57" long so I can cut and cut until it fits right. Or throw it away (-:
We shall see.
-
Quarters and trunk
Removed everything and treated with POR 15 rust preventer.
Drivers quarter and outer wheel house are finished.
Now on to the passenger side and the trunk floor.
Hope to have everything welded,smoothed and the cell mounted before the weekend. Anxious to sit it on the floor for the first time in 1.5 years.