I noticed in the Unique manual and in researching the forum that you should disconnect the rear brake master cylinder rod when bleeding the front brakes, and vice-versa.
Just out of curiosity, why is it necessary to disconnect the rods?
Printable View
I noticed in the Unique manual and in researching the forum that you should disconnect the rear brake master cylinder rod when bleeding the front brakes, and vice-versa.
Just out of curiosity, why is it necessary to disconnect the rods?
would isolate front mas. cylinder from rear for easier job, heck, we just started the process and had it done no time. Will-alabama
Buy one of the Motive pressure bleeders for about $50-60. One person job, no disconnecting necessary. I was never able to get firm brakes on the old setup (MGB) until I used this thing. Just bled the fronts on the new suspension setup (current Unique w/Wilwoods) after the conversion with it. Firm brakes from scratch in less than 10 minutes. Love it.
That was actually going to be my very next question - if I by one of the Motive DIY bleeder kits, is it still necessary to disconnect the brake rods? I assumed not, and it looks like you confirmed it.
So which Motive products master cylinder cap fits our cars?
The one for "European" cars, if I remember correctly. 45mm round rings a bell.Quote:
Originally Posted by Russ Dickey
which willwood master cyl's do we have on our cars?
this bleeder system looks terrific.
thanks
doug
260-3372 MP-0100 or MP-0109
260-3374
MP-0100 or MP-0109
260-3376 MP-0100 or MP-0109
260-3378 MP-0100 or MP-0109
260-3380 MP-0100 or MP-0109
260-5920
MP-0100 or MP-0109
260-6764 MP-0105
260-6765 MP-0105
260-6766
MP-0105
260-1304
MP-0101
260-2636
MP-0101
260-6579
MP-0101
260-4893
MP-0105
260-4894
MP-0103
260-8555 None Available (Too large for any currently available adapters)
The correct one is 260-1304. I learned the hard way by ordering the wrong ones first.Quote:
Originally Posted by dmiller
I never disconnect the rods. I bleed one side front and rear at the same time. Rock hard pedal... always.
thank you, clay.
think i'll order this.
doug
This one should work for the Unique Hyd. Cylinders, Brake and Clutch
NEW ITEM! BLACK LABEL EUROPEAN POWER BLEEDER. Features Custom-machined aluminum cap and deluxe swivel fitting. Comes with an extra length of high grade poly urethane tubing that won't cloud or crack with exposure to brake fluid. Works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps All bleeders come with a full 1 year warranty. Application Guide. (Model 0109
Clay,
Did you ever try this thing on your C6 or the Z06? I'm about at the point of pad replacement on the C6, and this power bleeder looks like the ticket for dealing with an ABS system.
Gary,
I haven't used one, but everyone seems to agree it's a must have tool and works great on ABS cars as well. I plan on picking one up.
I think I'll order one too, and I'll probably get the adaptor for the Vette at the same time. I think with the newer ABS systems, you have to cycle the ABS valve after you've bled the brakes a first time in order to get old fluid out of the ABS reservoir. Then bleed the brakes a second time. I'll have to look at the trusty Helm manual to double check, but I think that's the procedure. Things were so much simpler in the 60s! :)
Yeah, that's my understanding from reading stuff on CF. A bunch of track guys were talking about how great that power bleeder works in the Z06 section.
As always gents, thanks for the input.
I ordered the Motive "Pro" Bleeder kit from Jeg's yesterday, that includes all the various master cylinder caps. That way, I'll for sure have the one that fits the Cobra, plus the ones that fit my old Mustang, my newer Mustang, my F-150, and the wife's Lincoln. And all my friends cars, who will then want me to come bleed their brakes...
It's supposed to be here tomorrow, so I'll let you know how it goes.
BUMP , will a might vac work to bleeed brakes?
i bought speed bleeders, they too speed up the process.
I was just looking at them on speedbleeders.com, do you know what thread we use in the cobra?
sorry, i don't remember, i pulled the bleeders and went to my local hot rod shop where he measured