Alan,
Can you tell by the photo how this cover mounts?
tc
Type: Posts; User: tcolley; Keyword(s):
Alan,
Can you tell by the photo how this cover mounts?
tc
How did the cover attach to the body. Usually there are "snaps/studs" that have to be drilled and mounted onto the body then the cover snaps down over them. However, some covers are attached with...
Do you have all the fasteners to go with the cover?
Terry
Alan,
I just couldn't let you get by with the Roll Tide bit! LOL
Regards,
Terry
If you go to my website www.33autos.com and then click on the Gallery section, build photos you can see several more shots of where the roll bar mounts.
Terry
Bill,
To get the shifter to come out in the correct FIA position you will need to either modify the T-5 with an Chevy S-10 pickup shifter and tail housing (see ffrforum on what to use), use an...
rdorman,
Really beautiful car and very nice pictures.
Good Luck in selling it!
I used a 5-speed Tremec TKO 600 with a .080 5th gear and mid-shift kit with a 3:42 limited slip rear end in my FIA. I haven't had it on the highway yet so don't know what the RPM's are in 5th gear...
Hey Guys,
Thanks for all the good comments!;)
Eddie, thanks for the pictures on how you modified your dash. Like you I am between 6'2"-6'3" weigh about 218 lbs and also have a size 13 foot....
Tony,
Thanks for the well wishes. ;)
My seat is bolted directly to the floor now so the only thing I can think of is to remove some of the bottom seat cushion, change seats or try to modify...
Well I finally was able to drive my car for the first time in the last 8 months. I've had a lot of problems recovering from my total knee (left knee) replacement last July 9th! :o
I had to...
Hey Bill,
Good video! Too bad the engine was missing as you surely would have ovetaken a couple of those cars much quicker. It is frustrating when you can't pass in the corners...isn't it!
...
Bill,
The tach is electrical working off the distributor.
Not all the FIA's had the Harrison tank and I just didn't like the way it looked with all the extra plumbing it requires. I also went...
Posted the wrong dash wiring pix. This is the one I wanted to show you.
My distributor is a reworked Ford to use a MSD 6AL ignition system and the tach works just fine.
Bill,
Here's a shot of my competition valve covers. They were hard to find and expensive and also require a special aluminum spacer available from Southern Automotive.
Bill,
They are mechanical and electrical.
Here's a 3/4 front shot and rear shot.
Bill,
Thanks for the nice compliment!
Yes I used the SW gauges!
Here's another shot.
this is what my competition dash looks like.
Alan,
I've finally finished rehab!:banana:
What a bear that was.:(
I think it is finally strong enough to push in the clutch now, once I can get my left knee bent enough to get into the...
Welcome to the forum.
My company, 33autos is the Texas distributor for Unique Motorcars, Southern Automotive Engines and Tremec Transmissions. We are located in the Southwest part of Houston,...
Jim,
I'm tcolley and had Alan build a taller rollbar for my Unique FIA as I am 6'3" tall with a 37" sleeve length. Originally it was 6" taller than stock but we lowered it to only 4" above stock...
Ya'll are just TOO MUCH!:D
Yes indeed a couple of the "sadist therapist" are 26 year old foxes[thumb]
However, they really seem to enjoy "torturing" elderly, aging older men!:rolleyes:
Now...
Started my 3rd week of rehab on Monday. I'm making good progress and at the end of my next 5 weeks and hoping to get back into the FIA again.:3g:
Rehab is a real bear...but has to be done in...