Weavers are you going to that London car show this year. We were thinking about going the wife says we need to drive our car up there. long way with no top.
Mike
Type: Posts; User: GREENHOUSE; Keyword(s):
Weavers are you going to that London car show this year. We were thinking about going the wife says we need to drive our car up there. long way with no top.
Mike
Check out these units they have a new more compact model. This is on my upgrade list, I talked to these guys they seem pretty helpful.
http://www.abspowerbrake.com
Mike
Check to see if you have any brake lines near a heat sourse even an exaust leak. Call the boys at unique for new pads, if your pads are jest sliding on the rotors that would make a whole lot of heat...
You might try changing your brake fluid, it sounds like the fluid is old or you boiled the fluid at one point (alot of hard braking or track use). Also take the off brake pads and replace them with...
Thread seal will not work its not that kind of leak you need to try new bleeder screws. Napa should carry them. The only way to keep the brakes from freezing up is to keep the fluid moving by...
You might try a C clamp to press the piston in and use air line to work the piston out be carfull not to shoot the piston across the room. And the breaks are a pain to get to even when the rear end...
I havent broke hum did any parts testing lately so count on the black sheep to show up. Trying to stay away from track days for a bit. I'm getting the shakes.
Mike
How many people are going this year, this may be the year I make it the whole weekend without any problems. Don't forget to tighten your lug nuts.
Rodney you know I have to bring my own trailer now. But good news is gas will cost about the same I think my dulle gets the same millage as the cobra about 6 mpg looking forward to seeing everyone....
Alan I Need To Get With You About A Room If There Is Any Left. I Keep Getting Side Tracked During The Day. I Try And Call You On Thursday.
Thanks Mike
If your has been sitting for a bit you might have flat spots on your tires. It happens to my cars all the time.
Mike
Does Anyone Have Unique's Fax# I Need To Fax My Registration For Homecoming.
Thanks,
Mike
Of the people who are comming from alabama how many are towing and how many are going to drive ther cobra. The route from birmingham is about 600 miles. Is lodging a problem?
Mike
Here is some pic's from the Talladega Grand Prix track. What a blast, the BFG tires look good but have very little bite for a road corse. Car ran great had to quit a little early due to strange noise...
Is the black hose you have there cloth braid or steel braided. I need to replace the steel braided line I have to my carberator and go with the black for a better look. Are the black anodized...
You may have an air bubble in the system and it's time to change the t-stat with a good brand. The t-stats fail from time to time.
Mike
Hear Is The Specification If You Do Not Have Them.
Mike
Tony sorry for the delay hear is what I have for pic's. If I get time I will take some more pic's later today of the finish look
Mike
If i had the room i would go with a 2 post lift, my garage celling was to low to fit a 2 post. You can do a lot more with a 2 post lift.
mike
The Lift Came From Complete Hydraulic Its A 8,000 Pound It Cost About $2,200 Delivered.it Came With Steal Casters So You Can Move It Around And They Realy Work. I Also Bought An Extra Set Of Ramps So...
No More Flat Backing Tranneys Santa Brought Me A New Four Post Lift.this Is One Of Thouse Tools You Look Back And Say Why Didn't I Get One Of These Sooner. I Over Extend The Hyd Barring Oil Every...
Try Installing Gromets In The Holes, They Come In All Sizes And It Will Give You Insolation Between The An Fitting And Your Sheet Metal.
Mike
If Your Car Has Been Sitting For A Bit You Might Have Flat Spots. I Have One Car If It Sets For More Then 2 Weeks It Will Take About 20 Min Of Slow Driving To Get Them Round. When The Weather Is Cold...
Justin Give The Guy A Call At Black Mountin 530-459-3921 They Were Realy Helpfull With My Project. They Might Have Something In The Works For Your Motor .this Place Sounds Like A Small Fab Shop Most...
I'am Running The Holley Blue Fule Pump With My Bb It Feeds A 750 Holley. The Pump Is Vary Noisey And I Have Mine Mounted On I/2 Rubber. With The Motor Running You Can't Hear Nothing But The Side...