Right now I'm using a old hypoid oil squirt bottle with a hose attached, but brake fluid and paint don't get along well and I figure it's just a matter of time before I get bit. I've even considered...
Type: Posts; User: sllib; Keyword(s):
Right now I'm using a old hypoid oil squirt bottle with a hose attached, but brake fluid and paint don't get along well and I figure it's just a matter of time before I get bit. I've even considered...
I have the standard Wilwood master cylinders that came with my car but I would like to move the reservoirs over to the LS fender to avoid the mess involved with bleeding and filling the old...
That puts an entirely new spin on the phrase "Government Motors".
Bill
Uh, you forgot the link.
Bill
Thanks, OLBLU66. I saved the "deluxe photo set" from your old post and I sometimes call them up and drool. I'd love to try a shroud like yours but my metal working skills just aren't up to the task....
Thanks. My shroud is not much to see, just a steel sheet, cut to fit , with a big round hole in the middle. I'll rivet it to the radiator top and bottom and seal the whole thing off with weather...
I slotted the mounting tabs and the bushing brackets on my sway bar mounts to give me a little more clearance between the bar and my fan so I could run a shroud. The stand-offs that mount the bar to...
Check out "Handbook for Radicals" by Saul Alinsky. The "re-define and demonize" procedure has served Comrade Obama and the Party well for decades.
Bill
There was a lot of discussion over on Club Cobra recently about this system. Try doing a search. I lost interest as it didn't suit my needs (My needs being a full stack Weber system paid for by...
I have the same Victor pump and my bolts use a coarse thread, 5/16" I believe. I also have a set of Edelbrock "Elite" valve covers without the logo that say "Made in USA" on the box but "Made in...
Dave;
I had a similar problem with my pipes. It turned out that a combination of the AFR heads (higher exhaust ports) and those pretty red Prothane motor mounts left the gap in my flanges so wide I...
Brent;
What do you do in Evansville? I work for Windstream Communications, which bought KDL
(Kentucky Data Link), which was headquartered in Evansville. Coincidence?
Ron;
I'm running 17" wheels, 8" in front and 11" in back and I had them backspaced to the spec.'s that Maurice gave me, which were 4" in front and 5" in back. I didn't trust my memory so I looked...
I don't know what you guys are talking about. Don't you recognize the new Lucas electric fuel pump?
Found them!! It took a lot of light and a big magnifying glass but I found the front one right behind the Allen head cross-member bolt. Once I knew what to look for I found the rear number on the end...
Nope. I'll call.
Thanks for the replies. I have the VIN tag and read the thread but, still, no joy. I put on my magnifying glasses and applied lots of light but still didn't see any number. I guess I'll have to do it...
Not trying to hi-jack the thread, but does anyone know if the Unique frame number is stamped or etched somewhere on the frame? If a state inspector asks I wouldn't know what to tell him. I didn't get...
FYI: the Koul Tool is available at Summit but doesn't come in the "medium" size, so if you have both 8 and 10 AN hoses on your car, like me, you have to buy the small and the large set or go to...
Chris;
Great looking car. I have the Torque Thrust D's on my truck and a 17" variation on my car. Word to the wise: put a coat of wax on those wheels ASAP or you'll get the dreaded "black spots"...
Dave;
Did you ever paint your cap? A couple of years ago I called MSD about another problem and asked them if they made a black cap to fit the wide dizzy. At the time they didn't, so I asked if...
I found them on the Ford Racing site, Summit, and Jegs. The last two were cheaper but didn't include the bits and pieces to make them work; Ford did. I'm using unsigned Edelbrock Elites now and the...
I like your valve covers. I looked them up but couldn't find them in "tall" only stock height. Did they fit over your roller rocker arms or did you have to use a spacer? You have the same engine...
Arrowdriver;
I bought a "Black Velvet" welding blanket from Summit. I plan to cut it to mount under the seats on both sides and roll out to cover the pipes when entering or exiting the car. It...
Mark;
Word to the wise: back up all your photos and TEST your back-up software before you need it. Don't ask me how I know this; my documentation project went down the digital sewer.
Bill