-
November 15th, 2003, 08:58 AM
#1
Body on rotary
Trailered the body up to son Greg’s garage and put it on the rotary so now the body work can begin in earnest.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
-
November 15th, 2003, 11:54 AM
#2
Very impressive, to say the least [^] I've seen this used with metal/steel cars mounted to the frame, but what work needs to be done on a Unique using a rotisserie? Probably a dumb question if you have it available.... but???????
Phil
427 Roadster, #4279436
Southern Automotive FE
Toploader
Roseville (N.Cal)
-
November 15th, 2003, 11:54 AM
#3
Very impressive, to say the least [^] I've seen this used with metal/steel cars mounted to the frame, but what work needs to be done on a Unique using a rotisserie? Probably a dumb question if you have it available.... but???????
Phil
427 Roadster, #4279436
Southern Automotive FE
Toploader
Roseville (N.Cal)
-
November 15th, 2003, 12:02 PM
#4
hello fellows, thanks for the welcome on earlier post. that looks like a great setup to work on the body,plus you have lots of room.have mine on a body buck,to go to the paint shop end of next week.started on the chassis and engine work.my color probably will be black w/gold stripes.sounds like you have choosen black also.should look great. thanks glenn.
-
November 15th, 2003, 12:02 PM
#5
hello fellows, thanks for the welcome on earlier post. that looks like a great setup to work on the body,plus you have lots of room.have mine on a body buck,to go to the paint shop end of next week.started on the chassis and engine work.my color probably will be black w/gold stripes.sounds like you have choosen black also.should look great. thanks glenn.
-
November 15th, 2003, 11:29 PM
#6
Maybe a picture of the 2x6 & 2x4 frame we built under the body will help.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
-
November 15th, 2003, 11:29 PM
#7
Maybe a picture of the 2x6 & 2x4 frame we built under the body will help.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
-
November 16th, 2003, 08:12 AM
#8
Make sure you fit the doors,hood,and trunk on the chassis. The body moves ALOT off the chassis. It would be a shame to find this out later.
Nice setup. Thats awesome!!
Brent
-
November 16th, 2003, 08:12 AM
#9
Make sure you fit the doors,hood,and trunk on the chassis. The body moves ALOT off the chassis. It would be a shame to find this out later.
Nice setup. Thats awesome!!
Brent
-
November 16th, 2003, 10:36 PM
#10
Hi Brent, Greg did fit the hood, trunklid & doors before we removed the body from the chassis and are suprised how well they still fit on my wood frame.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
-
November 16th, 2003, 10:36 PM
#11
Hi Brent, Greg did fit the hood, trunklid & doors before we removed the body from the chassis and are suprised how well they still fit on my wood frame.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
-
November 16th, 2003, 11:35 PM
#12
Good deal.
Your weather is probably just like ours. Perfect time for body work. Wait...there is never a perfect time for body work. )-:
Brent
-
November 16th, 2003, 11:35 PM
#13
Good deal.
Your weather is probably just like ours. Perfect time for body work. Wait...there is never a perfect time for body work. )-:
Brent
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Guru
Reply With Quote