Part 7- Repairing the frame

[RJacobsen]

In this section I will go over some of the repairs and/or changes that I am making to the frame. The previous owner added bracing that I will remove or change and cut away pieces (including the entire rear portion of the frame) that I need to replace.


If you look close at the next picture, you will notice that the front body mounting tab is gone as well as the jack bar mount. I have no idea why this was done but figured this was a good place to start the repairs.



This shot shows the newly fabricated parts welded on. With the body in place I am able to line up these items. I will finish any welding that I can't get to later, after the body is removed.



to be continued.....