I am wiring a push button start switch in the dash and cant seem to get it to work. My plan is to use a high amperage switch and no relay. Anyone know how to wire it? thanks
I am wiring a push button start switch in the dash and cant seem to get it to work. My plan is to use a high amperage switch and no relay. Anyone know how to wire it? thanks
Peter,
Are you keeping the ignition (key) switch or are going keyless?
Paul
Vancouver, Washington
planning to keep the key switch
Run a wire from the Assy side of ignition switch to your push button starter, then connect other wire to your starter solenoid.
Scott
4279454
SA 428
3:54
thanks much! your in Cinci? im in Dayton
Peter,
I did mine the same way. It works great.
Tony
Unique 427 #4279480 Precision Engine Machine Company 427 s/o 483.47 stroker close ratio toploader 3.31 jag rear
The purple wire is already in the harness for the solenoid.Originally Posted by Master
Tony
Unique 427 #4279480 Precision Engine Machine Company 427 s/o 483.47 stroker close ratio toploader 3.31 jag rear
Peter, I live on the north side of Cincinnati West Chester Area about 20 minutes from downtown Dayton.
Scott
4279454
SA 428
3:54