Does the Wilwood bias adjuster go on the right or left side of the pedal assembly?
Thanks,
Justin
Does the Wilwood bias adjuster go on the right or left side of the pedal assembly?
Thanks,
Justin
justin, i have mine on the right side. i think its the only way it threads onto the rod. later, brian.
I have mine on the right side but It can go on either side.The right side keeps it away from the clutch pedal.
Hear is a link with pics of Ricks install. I did mine the same way.
http://www.uniquecobra.com/showthrea...ght=brake+bias
Last edited by Naumoff; September 10th, 2006 at 05:50 PM.
Tony
Unique 427 #4279480 Precision Engine Machine Company 427 s/o 483.47 stroker close ratio toploader 3.31 jag rear
Thanks, It looked like I did it correctly. Does the rod moving toward the clutch pedal give more front or rear bias?
Justin
More Front.
http://www.uniquecobra.com/showthread.php?t=6786
Tony
Unique 427 #4279480 Precision Engine Machine Company 427 s/o 483.47 stroker close ratio toploader 3.31 jag rear
I just saw this post. You probably have it figured out by now, however, this is how mine is setup. Since this photo was taken I have installed a Wilwood remote bias adjustment kit. It saves having to crawl into the footbox to make adjustments.
Phil
427 Roadster, #4279436
FE Specialties FE
3:31 and Toploader (wide ratio)
Roseville (N.Cal)
Wilwood Remote Bias Kit (you can Google for other suppliers) - http://www.veesportracing.com/remote...bias_adj_3.htm
Phil
427 Roadster, #4279436
FE Specialties FE
3:31 and Toploader (wide ratio)
Roseville (N.Cal)