Originally Posted by
eliminator
90-100 Ft Lbs
Thanks Rick,
Would you happen to know if the studs are pressed in or screwed in with LH threads, I have 1 that wont torque, it appears to be spinning.
The stud has an allen head on it.
I was thinking of backing it off with a vice grip, putting red loctite on the threads, then tighten it back down, let it sit for a day, then put the wheel back on and try torquing again.
Dave
93 Unique Motorcars 427 SC, 428PI with CJ heads, toploader 4 spd,jag rear with 354 gears, Red with white stripes.
Reply With Quote