Results 1 to 14 of 14

Thread: Chapter 19 - The Fire Within

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2003
    Location
    Bella Vista, Arkansas, USA.
    Posts
    59

    Chapter 19 - The Fire Within

    Greetings all, Brian here again. Signed in as my Dad so that I can upload pictures! This is about my most proud thread as all the hard work is truly coming to fruition. The seemingly unending project is progressing toward culmination. (Much to Cathy's approval) In case you don't want to wander through all the below prose, here's the Cliff Notes version...The Legendary Spence Car is alive and well. If you listen real hard, you can hear the theme song to the 6 Million Dollar Man..."We can rebuild him. Better. Faster. Stronger."



    After three plus years of building, wiring, and plumbing I was nearly sick last Friday night as I considered the plans for the following day. Our checklist of activities had dwindled to a simple few items such as “prime oil pump, add antifreeze, add fuel”. A few sleepless hours later the alarm clock sounded signaling the start of a much anticipated day.

    The preliminary tasks went quickly, but were not without excitement. Our gleaming machine was leaking critical fluids like a sieve due primarily to AN fittings requiring a little extra snug to create final, drip free seal. With fuel pressure in the injector rails and all items checked from our list, there was only one job left for this warm Saturday afternoon.

    With a gentle twist of the key the PMGR starter whirred to life and somewhere deep within the shining black cast iron engine block a high voltage spark ignited a cocktail of compressed air and vaporized hydrocarbons with a deep and hollow resonance. Seconds later a gleaming silver piston was hurtling through space in a direction opposite of the one it had been just been traveling. Close by, seven other followed suit and the engine jumped to life with authoritative bark.

    After starting so smoothly, the engine seemed to ‘remember’ that startup is not supposed to be that easy, and quickly registered a protest from being awakened from slumber by promptly emitting puffs of black smoke as the protective assembly lubricants began to burn from the now firing cylinders.

    Though not in peak tune, the engine is alive and well. Our entire neighborhood has embraced the Cobra project, and once the rumbling eminated from the garage that afternoon our friends flocked to check out the newly awaken monster on the corner. The car sounds tough as nails and drew smiles from all friends who looked on. Such was the local excitement that we were persuaded to fire up the little snake again late into the evening hours – an activity that will surely draw a different reaction once the neighborhood excitement wanes for the hot rod..

    All adjectives aside, my pride could scarcely be contained through the day as the engine actually started. Easily. Quickly. The whole time the motor was running I was waiting for some sort of out of place sound alerting me to some sort of impending disaster. Though we’re not out of the woods yet, there is a light at the other end of this forest. Dad and I are now sprinting to that light, hoping to get this little car on the road so we can put all of our hard work to the test!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Outside1.JPG 
Views:	165 
Size:	204.5 KB 
ID:	1099   Click image for larger version. 

Name:	Outside2.JPG 
Views:	157 
Size:	207.8 KB 
ID:	1100   Click image for larger version. 

Name:	Inside1a.jpg 
Views:	139 
Size:	209.5 KB 
ID:	1101   Click image for larger version. 

Name:	Inside2a.jpg 
Views:	147 
Size:	213.8 KB 
ID:	1102  

    Click image for larger version. 

Name:	Inside3a.jpg 
Views:	151 
Size:	232.2 KB 
ID:	1103  
    Last edited by Glenview289; July 13th, 2007 at 08:57 PM.

  2. #2
    Join Date
    May 2005
    Location
    Roseville, Ca., USA.
    Posts
    523
    Brian, It's good to here from you. I was wondering how your project was going. looks like (and sounds like) all is well. Congrats on getting the motor fired. I hope to be sharing those same sounds with my neighbors sometime soon.
    Rod
    Roseville, Ca.
    289 FIA #9152 "The Flintstone Cobra"

  3. #3
    Join Date
    Sep 2004
    Location
    Bainbridge Island, WA, USA.
    Posts
    196

    Smile

    Congratulations Brian! I was quick to open your post when I saw the word "fire" in the title and was relieved to read that you were referring to firing up the motor versus the other kind of fire. Looking forward to your next installment.

    Bob

  4. #4
    Join Date
    Oct 2003
    Location
    , AL, USA.
    Posts
    46
    Man, it's come a long way from when I looked at it:




    '66 GT-350H : '69 428SCJ Mach 1
    '70 Boss 302 : '93 SVT Cobra
    '72 Pantera

  5. #5
    Join Date
    Jan 2003
    Location
    Seattle, WA, USA.
    Posts
    1,083
    It's looking really great. What EFI controller are you using BTY? Accell DFI? FAST?
    Patrick Brown
    Forum Administrator



  6. #6
    Join Date
    Nov 2003
    Location
    Annapolis, MD, USA.
    Posts
    1,523
    Looks great Brian. Finish that sucker, and drive!
    Clay

    1998 Unique #9299,
    427FE side oiler (452.1-stroker)
    Top-loader (close), 3.31 rear

    Annapolis, MD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •