I was a little short of WOT when the pedal was bottomed.
Well, I started by thinking I just needed to make the first rod longer so the pedal was a bit higher for longer travel, and this would give me WOT when the pedal bottoms out against the firewall.
Well, it is a lot worse now, making it shorter or longer is not working at all, so I guess from looking at this thread i should have been messing with the carb rod.
So how do I get the rod I have been messing with back to where it was before I started it...I did not take a measurement before I started adjusting...does anyone no how many threads (minimum)it should be screwed into each turnbuckle, so I can have a starting point at least, any other help would be appreciate it.
Thanks...Dave
Dave
93 Unique Motorcars 427 SC, 428PI with CJ heads, toploader 4 spd,jag rear with 354 gears, Red with white stripes.