If you thought that by now that you had seen all of the strange things that had been done to this car you would be wrong. The next repair/cobble reversal has to do with the steering column. For some crazy reason the column had been shortened. The following picture shows the approximate position of the present column and shafts. Missing from the picture is a large Heim joint welded to a piece of steel plate that anchored the column end to the foot box top.



This picture shows the length of the column (about 23” overall) and circled in red is where the cut piece had been welded back together.



I have to admit I was a little nervous about trying to lengthen the column and shafts because of the serious nature of any potential weld failures, but decided to go ahead anyway.
I started by adding about a 6” length to the steering shaft. The next picture shows the un-welded pieces laying in a piece of angle iron that I clamped them onto to keep everything straight.



This shot is after welding and grinding.