Results 1 to 12 of 12

Thread: Southern Automotive 452 CI Engine

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2003
    Location
    Harrisburg, PA, USA.
    Posts
    657

    Southern Automotive 452 CI Engine

    I called Bill Parham at Southern Automotive Engines last week and he made me aware that he is producing stroker 406's using a new Scat Crank. As I recall horsepower was something like 525. I forgot the related torque figure.
    Price under $7000 for base model.
    He said it's a real torque-monster
    Not a bad deal !!

    -Geary

  2. #2
    Join Date
    Dec 2004
    Location
    Prince Frederick, Maryland, USA.
    Posts
    1,561
    You can't beat that price for what you get. I went for a ride last summer in John Kerr's of Crendon Replicas in England He had a 452 in his demo and it has plenty of torque. Ask bill for a little less lumpy came John changed the cam. I guess with the automatic and the twin Paxtons the cam is going to be totally different anyway.

    Jim has a 452FE in his new Raffle Unique Cobra.
    Tony
    Unique 427 #4279480 Precision Engine Machine Company 427 s/o 483.47 stroker close ratio toploader 3.31 jag rear

  3. #3
    Join Date
    Nov 2003
    Location
    La Plata, Maryland, USA.
    Posts
    421
    The SA FE452 dyno sheet indicates 512 HP @ 5700 and 518 ftlbs @ 4400. Nice lumpy cam. Probably could get the torque and HP to peak at something lower if you swapped out the single plane intake for a dual plane. According to the spec sheet that came with my motor, the base price for his "406 super FE stroked to 452 CI" is $8500. Add a bunch of other necessary stuff and some real cool bling, and his price goes up to 14K.... that's the one he built for my car.
    Jim Harding
    #4279512 - SA452 - TKO600
    #3004 - 302 - 4 speed
    La Plata, Maryland

  4. #4
    Join Date
    Jan 2006
    Location
    Prattville, AL, USA
    Posts
    97
    I have the same type of motor that was put in Jim car 452 SuperFE, except I think Jim's motor was polished. He is right, I just pulled the dyno sheet from my sales packet. However, I just got my car so I have never heard it run or felt the power. Jim, have you driven the car yet? I can not wait to start mine but I am sure the neighbors are glad it is still in the garage.

  5. #5
    Join Date
    Nov 2003
    Location
    La Plata, Maryland, USA.
    Posts
    421
    Hi Phillip, and welcome to the gang. The new car runs great, and that is a modest report. I've only managed about 600 miles on it due to a lot of other things going on in my life, but believe me, when the opportunity strikes, I'm in for a ride! Mine came with the TKO600 5 speed and I like the OD 5th gear at highway speeds. The song from the side pipes almost disappear. Almost as quiet as the under car exhaust on my other Unique.
    You're neighbors might have issues too.... cranking mine up early on a Saturday morning (6:30) to meet my club members for breakfest no doubt wakes few of them, but so far no complaints have been made.
    Jim Harding
    #4279512 - SA452 - TKO600
    #3004 - 302 - 4 speed
    La Plata, Maryland

  6. #6
    Join Date
    Jan 2003
    Location
    Fairfax Station, VA, USA.
    Posts
    166
    Jim,

    When are you going to bring that monster to the Vienna Inn so the rest of us can have a look? Supposed to be good weather tomorrow - let's get with the program! And glad to hear you're finally getting the time to put some miles on it.
    Gary
    Unique FIA 351W

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •