-
December 5th, 2007, 07:38 PM
#1
Another slave question
Anyone running this setup?
http://www.clubcobra.com/forums/atta...0&d=1169620701
I'd be attaching to a tremec 3550 (looks like it has the required mounting tabs) and using a mcleod bell housing. I suspect I'd need a clutch fork extender, but seems like it would work.
Looking forward to your feedback!
Chris
Last edited by cwareham; December 5th, 2007 at 07:39 PM.
Reason: brain fart.
-
December 6th, 2007, 12:34 PM
#2
In the past we used a hyd slave setup that pushed instead of the pull type, I will check to see if we can still supply the parts you would need.
Alan
-
December 12th, 2007, 01:06 PM
#3
I'm good Alan...I ended up doing a push style setup. I got it mounted up to the bell, and am using a fork in a kit put together by Mike Forte. Now that it's together I can see that it's a pretty nice piece. I was hesitant to do the HTOB, only because if I were to hose it up I didn't want to have to pull the powertrain to change it. I figured that this would be a good compromise between a pull setup and an HTOB.
http://picasaweb.google.com/wareham/...utchSlaveSetup
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules