MSD Wiring
Walter,
Mine are wired as MSD suggested, purple and green are not with the other wires in the harness. My red power wire does go to the solenoid and my ground to the frame section behind the dash. You have to remember the frame support in the dash area is really not physically conneted to the under car frame, only by bolts. The fiberglass is sandwiched in between, I used star washers under the bolts and washers so they would dig into the upper frame in the cockpit and the lower frame under the car. You must have a good connection between both to acheive the proper ground. Good new, no distributor problems, voltage regulator, or any other electrical problems in 6 years.....nock nock...
Rick
427 S/C , 427 Side-oiler, 4 Speed Close Ratio Top Loader, 3:73 Gear
#4279405