Sway Bar Bushings Upgrade

[eliminator]

Just got around to changing out the MGB stock sway bar bushings, (left side of photo) with Energy Suspension Performance Polyurethane Bushings, (right side of photo).

These will increase the performance for street and track, the old bushings are a soft rubber compound and they give a lot, and the metal bracket is a little weak. These are more durable have a larger area to support the sway bar and stiffen up the suspension when in turns, helping to eliminate body roll.

I purchase these from Summit, I am sure Jeg's has them too, the manufacture part # is 9.5123G for a 3/4"/19MM sway bar. They have a little adjustment in the the hole pattern, and fit the stock hole pattern with no problems, (approx 2 - 5/8" center to center). A special lubricant comes with the bushings,