-
April 15th, 2009, 11:32 AM
#1
opening holes in dashboard
has anybody open a hole in the dash without tearing up the vinyl cover if so how did you do this .
-
April 15th, 2009, 12:41 PM
#2
Use a step bit from the backside if possible, take your time and you should be OK.
Alan
-
April 15th, 2009, 04:21 PM
#3
I used a hole punch for making holes in gasket material to cut the vinyl, then used a drill for the fiberglass (turn the hole punch by hand to cut the vinyl). Worked great for me.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules