I understand the steering column has a turn signal lever. Is the steering colum set up to use a GM style wiring harness?
Bill, I don't know the maker of the steering column stalk control unit used by Unique, but it looks like the wiring harness connectors are done "in-house" to mate up with the rest of the dash wiring. It's definitely not GM, like Ididit uses. If you're going to "roll your own" dash harness, the manual supplied by Unique will make "interfacing" theirs with yours easy.
Jim Harding
#4279512 - SA452 - TKO600
#3004 - 302 - 4 speed
La Plata, Maryland
The steering column has a turn signal but it does not have auto shutoff.....all the wiring is in the wiring harness that you purchase...do not be intimidated by the mass of wires that are there....it is a simple operation...just take your time and if you have any questions just ask us....most of us have done our own work and can help you avoid some work!!!!! or when all else fails ask Maurice or Alan!!!!
dickieboy7
Unique 289FIA-Green
351C-4V cobra jet
Toploader
did it myself..and fix it
I thought I heard that the column was updated on newer versions to include the auto-shutoff blinkers. Did I get that wrong?
Paul
289 USRRC
1964 289 5-bolt block
Toploader and 3.31 rear
That be right!!!
Rick
427 S/C , 427 Side-oiler, 4 Speed Close Ratio Top Loader, 3:73 Gear
#4279405
Thanks for the clarification Rick... we appreciate your help!
Paul
289 USRRC
1964 289 5-bolt block
Toploader and 3.31 rear