-
January 17th, 2010, 05:41 AM
#1
Turkey Pan Questions
Need to ask the Unique experts on this one....
Have a one-inch spacer on the intake to accomodate the QFT 950 Carb; with this, can a turkey pan fit without major mods to the hood?
I suspect I will need to customize a bit, assuming I buy the standard "pan".
Thanks and look forward to comments and pictures if possible...
Gino
-
January 17th, 2010, 07:32 PM
#2
The turkey pan base is no thicker than a carb gasket. I have an edlebrock intake and holley carb and there is no way I could have used a 1'' spacer. I think some have used them on certain applications. Mine is a FE with a holley 800 dbl pmp and edlebrock performer intake. i would think you would put your spacer on the inside of the turkey pan. it will raise the carb, but not the pan.
thanks,
Eddie
Last edited by robbinsshkr; January 17th, 2010 at 07:34 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules