Results 1 to 2 of 2

Thread: Turkey Pan Questions

  1. January 17th, 2010, 05:41 AM #1
    rosco
    rosco is offline Enthusiast
    Join Date
    Dec 2007
    Location
    Dover, NH
    Posts
    30

    Turkey Pan Questions

    Need to ask the Unique experts on this one....

    Have a one-inch spacer on the intake to accomodate the QFT 950 Carb; with this, can a turkey pan fit without major mods to the hood?

    I suspect I will need to customize a bit, assuming I buy the standard "pan".

    Thanks and look forward to comments and pictures if possible...

    Gino
    Reply With Quote Reply With Quote
  2. January 17th, 2010, 07:32 PM #2
    robbinsshkr
    robbinsshkr is offline Guru
    Join Date
    Jul 2008
    Location
    booneville in
    Posts
    196
    The turkey pan base is no thicker than a carb gasket. I have an edlebrock intake and holley carb and there is no way I could have used a 1'' spacer. I think some have used them on certain applications. Mine is a FE with a holley 800 dbl pmp and edlebrock performer intake. i would think you would put your spacer on the inside of the turkey pan. it will raise the carb, but not the pan.
    thanks,
    Eddie
    Last edited by robbinsshkr; January 17th, 2010 at 07:34 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules