I have a SA FE with very little clearance between the air cleaner and the hood. The air filter I'm using is 8 1/2 by 2 1/2 high. Does anyone know where I can find a filter that is 1 1/2 to 2 inches in hight. Thanks.
I have a SA FE with very little clearance between the air cleaner and the hood. The air filter I'm using is 8 1/2 by 2 1/2 high. Does anyone know where I can find a filter that is 1 1/2 to 2 inches in hight. Thanks.
You need all the air you can get with a FE, if you have any clearance at all don't change.
Alan
might want to try one of these if you go to a shallow filter
http://www.knfilters.com/universal/X-stream.htm
I had a Summit oval filter assy.on mine but wanted more air, so I bought a K&N drop base assy. with an Xtreme top and a 1 1/4" drop. That put me too close to the distributor (Victor Jr. manifold) so I added a 1/2" carb spacer. I bought a new hood and bolt-on scoop to replace a damaged hood and this new set-up would work without the scoop. Perfect!
Bill Stradtner
Bill Stradtner, Portsmouth, VA
427 S/C #9442
427W Dart "Replica" Ford Engine
Thanks gentlemen. I think I'll take Alan's advice and live with the small clearance. Thanks Alan.
Randy