Results 1 to 9 of 9

Thread: Wheel Size/Alignment

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #5
    Join Date
    Jan 2003
    Location
    Harrisburg, PA, USA.
    Posts
    657
    Alan - I have 10 x 15 fronts and 11 x 15 rears. My first 2 Unique cars ran 8 X 15 fronts and 10 x 15 rears. I wanted to go up 1 inch on both fronts and rears on this car.
    I did not realize the problems that could occur with that decision in 2001.
    While I changed the front wheel bearings prior to this years homecoming they showed no extraordinary wear. The front suspension components all seem tight with no exceptional wear noted except for the steering rack. The rack was fine spindle to spindle but the bushings that center the rack within the steering assembly were totally beaten allowing much lateral movement within the tube. The beaten rack was also replaced prior to 2013 homecoming.

    -Geary
    Last edited by Aggressor; September 26th, 2013 at 06:25 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •