Just finished installing some bigger Wilwood brakes on Lil Cobra so I thought I'd share some photos
Ralph
These next three shots try to give you a sense of how much bigger these brakes are:
The shot below is the safety wiring of one of the cap and rotor sets. I did the safety wiring after I did the cap and rotor indexing total on each right and left was about .002 inches runout. Time consuming but vell worth the effort
The next two shots are the rotors on the spindles
These two shots are the safety wiring of the Joe Trout mounting bracket and the calipers
The last two shots are the finished product bled and ready to go
Hope you enjoyed them I'm working on the turkey pan and the self cancelling turn-signals now