engine mounts

[dmiller]

i'm using a small block ford, in the 289 body. In the build instructions, i see the specification anchor part # 2287 (2) for the engine mounts. but, my parts store can't find that number, what car/year engine mount should i be using?

thanks

doug

[Mike Geddes]

Hi Doug
I hope you told the boys in Gadsden that you were dropping a 351 in your 289 FIA.
If they have the put in the Frame mounts to your engine spec. the way I see it is that your local parts bin should be able to find the 351 mounts you need.
And yes....It is just starting to thaw up here....5 foot high piles of snow on Friday 14th are now 2 foot high piles...Monday 17th.
Mike

Mike Geddes

[Mike Geddes]

Hi Doug
I hope you told the boys in Gadsden that you were dropping a 351 in your 289 FIA.
If they have the put in the Frame mounts to your engine spec. the way I see it is that your local parts bin should be able to find the 351 mounts you need.
And yes....It is just starting to thaw up here....5 foot high piles of snow on Friday 14th are now 2 foot high piles...Monday 17th.
Mike

Mike Geddes

[dmiller]

yes, mike they knew it was a 351 w. i've written you a separate email outlining my status. good to hear from you.

[dmiller]

yes, mike they knew it was a 351 w. i've written you a separate email outlining my status. good to hear from you.

[weaver]

Try calling a NAPA store, they should have it in stock.

Alan

[weaver]

Try calling a NAPA store, they should have it in stock.

Alan