Self-canceling turn signals? Anyone?

[excelguru]

Is there a way to modify the non-canceling signals to make them self-canceling? Has anyone else done this successfully? It sure would save some embarassing moments. [:I]

Keith :)
Unique Motorcars (http://www.uniquecobrareplicas.com)
Southern Automotive (http://www.southernautomotiveengines.com)
Bruce Bunn (the painter) (http://www.jodecoautobody.com)

My Photo Album (http://members5.clubphoto.com/keith355593/owner-429c-1.phtml)

[Oldtimer]

Search, Self cancelling turn signals.

Rich

[Oldtimer]

Search, Self cancelling turn signals.

Rich

[Poorboy]

Keith,
Maybe your luck is better than mine. I did a serch and couldn't find the post. It is very easy to make them self-cancelling. Pull the steering shaft back (you don't have to take it all the way out). You will see a rollpin below the steering wheel adapter. Drill a 1/4" hole 1/2" above that(center to center) about 1/4" deep. Drive in a 1/4" rollpin leaving 3/8" sticking out. When you put the shaft back in point the new rollpin at the turn signel handle(you may have to reposition the steering wheel)

[Poorboy]

Keith,
Maybe your luck is better than mine. I did a serch and couldn't find the post. It is very easy to make them self-cancelling. Pull the steering shaft back (you don't have to take it all the way out). You will see a rollpin below the steering wheel adapter. Drill a 1/4" hole 1/2" above that(center to center) about 1/4" deep. Drive in a 1/4" rollpin leaving 3/8" sticking out. When you put the shaft back in point the new rollpin at the turn signel handle(you may have to reposition the steering wheel)

[pgermond]

Try this link.... pictures and everything!

http://www.uniquecobra.com/topic.asp?TOPIC_ID=13&SearchTerms=turn,signals



Phil

427 Roadster
Southern Automotive FE
Toploader

Roseville (N.Cal)

[pgermond]

Try this link.... pictures and everything!

http://www.uniquecobra.com/topic.asp?TOPIC_ID=13&SearchTerms=turn,signals



Phil

427 Roadster
Southern Automotive FE
Toploader

Roseville (N.Cal)

[Brent]

Works great!

Brent

[Brent]

Works great!

Brent

[eliminator]

I followed the directions on this site and it works great, tried to convience Alan and Maurice to do it on all cars as the turn signals are set up for it.

Eliminator

[eliminator]

I followed the directions on this site and it works great, tried to convience Alan and Maurice to do it on all cars as the turn signals are set up for it.

Eliminator

[excelguru]

Exceptional! I know what I'M doing this weekend...

Keith :)
Unique Motorcars (http://www.uniquecobrareplicas.com)
Southern Automotive (http://www.southernautomotiveengines.com)
Bruce Bunn (the painter) (http://www.jodecoautobody.com)

My Photo Album (http://members5.clubphoto.com/keith355593/owner-429c-1.phtml)

[excelguru]

Exceptional! I know what I'M doing this weekend...

Keith :)
Unique Motorcars (http://www.uniquecobrareplicas.com)
Southern Automotive (http://www.southernautomotiveengines.com)
Bruce Bunn (the painter) (http://www.jodecoautobody.com)

My Photo Album (http://members5.clubphoto.com/keith355593/owner-429c-1.phtml)

[excelguru]

Completed the mod this weekend. I posted a thread on Club Cobra about it (Shop Talk Forum) since this site was down. The fix was very easy and definitely worth the minimal effort. Thanks guys.

Keith :)
Unique Motorcars (http://www.uniquecobrareplicas.com)
Southern Automotive (http://www.southernautomotiveengines.com)
Bruce Bunn (the painter) (http://www.jodecoautobody.com)

My Photo Album (http://members5.clubphoto.com/keith355593/owner-429c-1.phtml)

[excelguru]

Completed the mod this weekend. I posted a thread on Club Cobra about it (Shop Talk Forum) since this site was down. The fix was very easy and definitely worth the minimal effort. Thanks guys.

Keith :)
Unique Motorcars (http://www.uniquecobrareplicas.com)
Southern Automotive (http://www.southernautomotiveengines.com)
Bruce Bunn (the painter) (http://www.jodecoautobody.com)

My Photo Album (http://members5.clubphoto.com/keith355593/owner-429c-1.phtml)

[Brent]

When you guys take the column apart make sure you put a little white grease on the bushings of the shaft. It will squeek ALOT.

Brent

[Brent]

When you guys take the column apart make sure you put a little white grease on the bushings of the shaft. It will squeek ALOT.

Brent