PDA

View Full Version : The 351 is nearly ready


JerryBP
October 17th, 2003, 02:32 AM
Thia is what we have finished on our engine. the WRP on top is the local race car engine shop that did the machine work for us.
a 351Clevland with lots of Good-parts, Flo-benched and port-matched heads with Ferrea Stainless Valves 2.190 Int 1.70 Exh and Hardened Seats, K-Line Bronze Guides, Harland-Sharp Rockers, Springs, Retainers on a Crane rocker stud conversion kit.
Comp Hydro Cam .515 In .541 Ex Lift, 219 In 232 Ex Duration, Comp Lifters, Hi-tech Pushrods.
Block was Decked .010 to clean it up, champhered and polished all oil passages, brass freeze plugs,
Ford MS Rods & Pistons, Sealed Power Molly Rings,
Crank was turned .010, the counter weights were smothed an ATI Balancer, SPEC Alunium flywheel, Diaphram Clutch and all Dynamic Balanced.
Melling oil pump, Canton 8qt oil pan. Weeland alunium water pump. Eddlebrock Torquer manifold,
All ARP Stainless Bolts, Felpro Gaskets, Clevite 77 Berrings,.
now to add the fuel and ignition systems. Lakewood bellhousing, Tremec 5spd-od tranny and put it in the chasis.
http://www.uniquecobra.com/uploaded/jerrybp/351clev.JPG

Work in Progress Unique 427-9429 400hp 351C Tremec 5spd by Bruce, Greg & Jerry Porter
Brent
October 17th, 2003, 02:44 AM
Looks good. That should get the Snake moving.
Brent
October 17th, 2003, 02:44 AM
Looks good. That should get the Snake moving.
pgermond
October 17th, 2003, 08:28 AM
That ought to make the monkey dance [:P] How many ponies is that puppy going to be able to muster up?

Phil

427 Roadster, #4279436
Southern Automotive FE
Toploader

Roseville (N.Cal)
pgermond
October 17th, 2003, 08:28 AM
That ought to make the monkey dance [:P] How many ponies is that puppy going to be able to muster up?

Phil

427 Roadster, #4279436
Southern Automotive FE
Toploader

Roseville (N.Cal)
JerryBP
October 20th, 2003, 02:30 AM
The Computer program says 400+hp and the Pantera with a milder cam and a 600 Holly puts out 350 to the rear wheels at 5000rpm, when we get it Ford days at national trail we will find out.

Work in Progress Unique 427-9429 400+hp 351C Tremec 3550 5spd by Bruce, Greg & Jerry Porter
JerryBP
October 20th, 2003, 02:30 AM
The Computer program says 400+hp and the Pantera with a milder cam and a 600 Holly puts out 350 to the rear wheels at 5000rpm, when we get it Ford days at national trail we will find out.

Work in Progress Unique 427-9429 400+hp 351C Tremec 3550 5spd by Bruce, Greg & Jerry Porter
JerryBP
October 20th, 2003, 03:50 AM
http://www.uniquecobra.com/uploaded/jerrybp/wrp.jpg
This is why Dave builds engines for other people, so he can feed his Pasion.

Work in Progress Unique 427-9429 400+hp 351C Tremec 3550 5spd by Bruce, Greg & Jerry Porter
JerryBP
October 20th, 2003, 03:50 AM
http://www.uniquecobra.com/uploaded/jerrybp/wrp.jpg
This is why Dave builds engines for other people, so he can feed his Pasion.

Work in Progress Unique 427-9429 400+hp 351C Tremec 3550 5spd by Bruce, Greg & Jerry Porter