Body on rotary

[JerryBP]

Trailered the body up to son Greg’s garage and put it on the rotary so now the body work can begin in earnest.
http://www.uniquecobra.com/uploaded/jerrybp/on rotory.jpg

Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio

[pgermond]

Very impressive, to say the least [^] I've seen this used with metal/steel cars mounted to the frame, but what work needs to be done on a Unique using a rotisserie? Probably a dumb question if you have it available.... but???????

Phil

427 Roadster, #4279436
Southern Automotive FE
Toploader

Roseville (N.Cal)

[pgermond]

Very impressive, to say the least [^] I've seen this used with metal/steel cars mounted to the frame, but what work needs to be done on a Unique using a rotisserie? Probably a dumb question if you have it available.... but???????

Phil

427 Roadster, #4279436
Southern Automotive FE
Toploader

Roseville (N.Cal)

[glenn]

hello fellows, thanks for the welcome on earlier post. that looks like a great setup to work on the body,plus you have lots of room.have mine on a body buck,to go to the paint shop end of next week.started on the chassis and engine work.my color probably will be black w/gold stripes.sounds like you have choosen black also.should look great. thanks glenn.

[glenn]

hello fellows, thanks for the welcome on earlier post. that looks like a great setup to work on the body,plus you have lots of room.have mine on a body buck,to go to the paint shop end of next week.started on the chassis and engine work.my color probably will be black w/gold stripes.sounds like you have choosen black also.should look great. thanks glenn.

[JerryBP]

Maybe a picture of the 2x6 & 2x4 frame we built under the body will help.
http://www.uniquecobra.com/uploaded/jerrybp/frame.jpg

Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio

[JerryBP]

Maybe a picture of the 2x6 & 2x4 frame we built under the body will help.
http://www.uniquecobra.com/uploaded/jerrybp/frame.jpg

Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio

[Brent]

Make sure you fit the doors,hood,and trunk on the chassis. The body moves ALOT off the chassis. It would be a shame to find this out later.

Nice setup. Thats awesome!!

Brent

[Brent]

Make sure you fit the doors,hood,and trunk on the chassis. The body moves ALOT off the chassis. It would be a shame to find this out later.

Nice setup. Thats awesome!!

Brent

[JerryBP]

Hi Brent, Greg did fit the hood, trunklid & doors before we removed the body from the chassis and are suprised how well they still fit on my wood frame.

Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio

[JerryBP]

Hi Brent, Greg did fit the hood, trunklid & doors before we removed the body from the chassis and are suprised how well they still fit on my wood frame.

Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio

[Brent]

Good deal.

Your weather is probably just like ours. Perfect time for body work. Wait...there is never a perfect time for body work. )-:

Brent

[Brent]

Good deal.

Your weather is probably just like ours. Perfect time for body work. Wait...there is never a perfect time for body work. )-:

Brent