front suspension preload

[dmiller]

when screwing the adjustment nuts up to adjust the height of the front suspension, is there a lock nut or set screw to keep it in position? does just the tension of the spring keep it from backing off?

thanks

doug

[weaver]

There is no set screw, the weight of the car will hold the spring adjuster in place.

Alan

[eliminator]

There are little holes in the aluminum adjusting nut for a spanner wrench, you can put a dot of paint in one (like red) then go 180 degrees and put a dot of black in that one. This will help you remember how much you turned each one, like an indexing mark.

Eliminator

[dmiller]

thank you.

doug