PDA

View Full Version : Phenolic Spacer for Sale



eliminator
January 19th, 2004, 12:43 AM
I have a new Canton Phenolic Spacer, 1/2" P/N 85-152, for Holley Carb,
650CFM up. I bought 2 of these and just used one. If your running a single four barrel these are a must[^]. Keeps the heat out of the carb. and makes the carb. more efficient:). Will take 20.00 and I will pay shipping. If intrested send me an e-mail. rbagley@papesinc.com.http://www.uniquecobra.com/uploaded/eliminator/Canton Spacer.jpg

Eliminator

casaleenie
January 19th, 2004, 05:50 AM
Couldn't get the hood closed with two of them??

AL

eliminator
January 19th, 2004, 09:37 PM
Al,

I was going to use one under the Turkey Pan (which I did) and one on top of the pan before I put on the carb. Didn't need the extra plus way too many gaskets. You could use a one inch spacer on a 427 and still get the hood closed. The higher you raise the carb the more tunning problems you have to deal with. Bottom line, you need the spacer but 1/2" is fine.

Eliminator