View Full Version : Remote Oil Lines
Gerry
April 24th, 2004, 11:26 AM
Any tips on cutting the oil lines for the remote oil filter and cooler? Hacksaw? Reciprocating saw?
Thanks,
Gerry
Poorboy
April 24th, 2004, 12:02 PM
Gerry,
A chop saw works best. Wrap a piece of duck tape around the line at the cut line and cut though it. A die grinder with a cutoff wheel will also work.
Poorboy
homer
April 24th, 2004, 09:06 PM
I used a dremel tool with a cut off wheel -- make sure you flush the hose well to remove any bits of metal or rubber
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.