need measurments

[olblu66]

Shoud be getting my cobra [UNIQUE] 427...Pretty soon. It will probably ro into storage because of the weather here. My cobra will share it with my other car. Wanting to purchace a cover but they wont make one without measurments.Anyone have measurments of the car? only difference is a second rollbar. THANKS

[rdorman]

I don't know the measurements off the top of my head but there are a couple of companies selling them for the Cobra. Unless there is something in particular you are looking for, you could get one already the correct size. Most generic for a small car fit OK, Miata covers as well including the cockpit cover. But like I mentioned, there are companies that make them for cobras.
Rick

[brfutbrian]

finish line has a pretty decent cover. i think its about 180 or so. flannel lined. it should work with 2 roll bars, paula could tell you for sure. give em a call. 888 436 9113. later, brian.

[rdorman]

I have one of the flannel ones from the finish line...... nice. Also a generic three layer job for outside. Works fine.
Rick

[clayfoushee]

Blu,

I agree with Rick. Get a nice form fitting flannel cover from Finishline or Tony Branda. Then buy a cheapo, generic "rain proof" cover in the smallest size they sell at any auto parts store. Put it over the flannel cover, and it works well for those days you get caught in the rain.

Clay

'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear

Annapolis, MD

[pgermond]

Bought mine w/the kit through Unique.

Phil

427 Roadster, #4279436
Southern Automotive FE
3:31 and Toploader

Roseville (N.Cal)

[gasman]

Ole blue, Like Phil, I bought mine from Unique. It is very nice cover.

Steve Foushee
Unique #4279389

[clayfoushee]

Ooops.....sorry for not being PC.......I didn't even know they sold them.

Clay

'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear

Annapolis, MD

[eliminator]

Sorry, but I am not a fan of the flannel lined covers[V]
Tell you why, they have a tendency to pick up dirt and they keep the stuff in the flannel and it will be abrasive against the paint.
Califonia Car Covers has a complete line of covers and you don't need measurements. Tell them either FIA or 427 Cobra and they have you covered[^]. Yes they have the flannel if you want it. I use one of their covers (Superweave) that is like a nylon but it is 100% dust proof, light weight, washable, and breathable. This is the best cover they make and they are not cheap but neither is your car;),they run around 300.00. Have had the other covers on motorcycles and my Cobra and sold them and upgraded. Wish I would have spent the extra bucks the first time:(. They have a web site, and probably over 50% of the Street Rodders use their stuff. www.calcarcover.com 800-4235525

Rick
#4279405

[olblu66]

Thanks everyone for your replies. I'll check them out. I,ll check out Calf. car covers Rick ..thanks

[olblu66]

Thanks everyone for your replies. I'll check them out. I,ll check out Calf. car covers Rick ..thanks