PDA

View Full Version : Blue Thunder Products, Valve Covers


eliminator
June 15th, 2005, 06:34 AM
New Aluminum Valve Cover
http://www.uniquecobra.com/uploaded/eliminator/fevalvecover1.jpg

You can screw in a Breather, PCV adapter,or a solid plug.
http://www.uniquecobra.com/uploaded/eliminator/BTValvecover2.jpg

Should be no problem with Valve Cover Leaks.
http://www.uniquecobra.com/uploaded/eliminator/BTValvecover3.jpg

Retail is 285.00 per set, availability on current orders, Sept. 2005.[V]

Rick
#4279405
Slither
June 15th, 2005, 10:07 AM
Sweet :D:D! Do they make these for the small blocks?

Paul

289 FIA

2899464

408 Windsor

Toploader (wide)

3.07 rear
eliminator
June 15th, 2005, 10:58 AM
Not that I know of.

Rick
#4279405
spd4me
June 15th, 2005, 02:22 PM
I like that screw in valve. I always have to wipe off my valve cover where the rubber fitting goes in after a long drive.
pgermond
June 15th, 2005, 04:53 PM
Those are pur-r-r-rty [^] I see the valve cover has the baffle built in as well.

Phil

427 Roadster, #4279436
Southern Automotive FE
3:31 and Toploader

Roseville (N.Cal)