PDA

View Full Version : FIA Picture Needed Please!


nolastyankee
January 4th, 2006, 07:58 PM
While test fitting our radiator and fan this weekend, we realized that (even with the slim SPAL fan) there is no way it will fit in front of the sway bar with our current radiator mount. Therefore we are planning a modified radiator mount with a bit of forward relocation. I am looking for a photo underneath the nose of the car looking upward at the radiator mount and the clearance to the bodywork around the oil cooler area. I am also looking for rough dimensions of the space between the radiator mount and the nearest bodywork. A side photo would be appreciated too.

Thanks in advance!
Unique 289_FIA
January 6th, 2006, 03:34 PM
I'll try to get a few pics for you, I think our cars are close in terms of production date.

Robert
nolastyankee
January 6th, 2006, 04:37 PM
Robert,
Thanks much for the help!
Unique 289_FIA
January 8th, 2006, 04:09 PM
Brian, I have about 15 or so pics for you, but I figured they might do you more good if left in high resolution. Do you still use the earthlink address? We corresponded about the Hawk mods a while back, but I think you moved since then. Send me your email addy and I'll get them to you asap. It's about 20 megs.

Meanwhile, here's a couple new pics of my FIA. :D
nolastyankee
January 8th, 2006, 05:28 PM
Robert,
Sent you a PM as well with my e-mail.
Thanks!
Unique 289_FIA
January 8th, 2006, 05:50 PM
Email sent. Hopefully it goes through; if not, let me know and I'll split them up in groups.