breather

[twanita]

rick or phil, can you remember where you found that breather at rear of manifold? i tried jegs,summit and locally. thanks, jim o.

[Brent]

DSC Motorsports has them
Almost 1/2 price of Cobra Accessories

Usually has a few on E-BAY

http://www.dscmotorsport.com/

[pgermond]

Jim,

Mine came from Southern Automotive (different than the photo in your post) http://www.uniquecobra.com/gallery/showimage.php?i=209

If you are looking for the goose neck, try this - http://www.cobraaccessories.com/catalog/product_info.php?cPath=38&products_id=144

Good luck!

[pgermond]

Still showing off those Webers, huh Brent? ;)

[eliminator]

This is a Ford part for the FE engine, originally made to clear the rear carburetor on a 2 X 4 set up. Also works good on a engine with a Turkey Pan. So places like they have mentioned, Finishline, Tony Branda, ect. The intake was orginally cut out to receive a breather basket under the breather,
The breather basket and mesh media are available at Gessford Machine. Some intakes are machined to accept the breather and basket and some are not.

[Brent]

Yes I do Phil.

Actually I posted the two pictures to show both vents I used. When I removed the Webers I cut the top off of the factory one and used a K@N breather filter on top of it.

[pgermond]

Still have Weber envy Brent! ;)

[twanita]

thanks, that's what i needed. dsc looks good.
note to other new builders: don't cheap out by eliminating the turkey pan and oil cooler like i did. when you get the car 99% done you will want these finishing touches.