Seatbelt Eye bolts

[Justin Upchurch]

Does anyone know if the eyeblots that Simpson sales are long enough to go from the driveshaft loop to the inside of the car? The bolts are 50mm.

Justin

[eliminator]

You have to do one of two things, raise the safety loop so it is close to the floor or use some 1 1/2" square tube on top of the safety loop. But, no, they are not long enough unless you do some creative mounting.

[chris knueven]

justin,

i found some long forged eye bolts 3/8 or 7/16,dont remember which,
at lowes/maybe home depot. these were the continuous eye,not
el cheapo loops/bent steel. they were long enough to go through
the floor and mount on the driveshaft loop,they were also galvanized
to help keep from rusting......

hope this helps,
chris

[Master]

Justin, I did mine the way Rick mentioned, square tube mounted between loop and car bottom. Very rigid and safe.